Types
in Local

Foreign Type Accordingly

Composition

Appearance

Application

isopropyl tri-( acyl-dodecylbenz
- enesulfonic acid) titanate

JN-2

TTOP-12

isopropyl tri- (dioctyl acyl-phosphoryloxy) titanate

Used for dry pigments/fillers including calcium carbonate, clay, silicate, alumina hydrate, titanium dioxide, etc. Applicable to polypropylene, polythene, polystyrene, PVC, alkyd resin, acrylic resin, etc. Applicable to light or white products; Improve filling power and reduce cost, increase toughness and impact strength

JN-201

KR-201

Dicarboxy acyl ethylene titanate

Chelate-type structure, applicable to high humidity fillers including clay, talc powder, wetting silicon dioxide, water-treated fiber glass, aluminium silicate, carbon black, etc. Good coupling effect in variety of plastics resulted in the improvement of impact resistance, filling power, processing flowability. Used as coated agent for nanometer materials.

JN-115

KR-138S

bis(dioctyl pyrophosphate hydroxy acetate) titanate

Chelate-type structure, applicable to high humidity fillers including clay, talc powder, wetting silicon dioxide, aluminium silicate, carbon black, etc. Good coupling effect in variety of plastics resulted in the improvement of impact resistance, filling power, processing flowability. (With good water resistance), used in dispersion and anti-settling of coatings, improve films in various physical properties; Improve adhesion of the waterborne coatings to substrates; Thixotropy in waterborne latex.

JN-115A

KR-138S

bis(dioctyl pyrophosphate) hydroxy acetate titanate quaternary ammonium salt

Used as anti-settling agents and dispersant of pigments/fillers including carbon black, phthalocyanine and iron oxide, etc in waterborne coatings; Improve the adhesion to substrates

JN-108

TTOP-12

isopropyl tri-(dioctyl phosphate) titanate

Improve dispersion property of titanium dioxide used in polypropylene, hot-melting terpene resin, epoxy, acrylic resin and alkyd resin, etc. Improve glossy, opacity, wearability, adhesion, impact strength, and toughness of coatings film. Dispersants and anti-settling agents.

JN-118

TTOP-12

dioctyl phosphate

Dispersants for solvent-based coatings

JN-644

KR-138S

bis (pyrophosphoryl) hydroxyethyl acetate titanate

Dispersants and anti-settling agents for solvent-based coatings and inks. Improve leveling and adhesion, especially the adhesion to metallic substrates.

JN-646

KR-138S

bis (pyrophosphoryloxy) hydroxy acetate titanate quaternary ammonium salt

Used as dispersants, wetting agents and anti-settling agents for waterborne coatings; Improve adhesion to substrates. Applicable to exterior coatings and γ -Fe 2 O 3 magnetic treatment.

JN-TNF

KR-201

Alkylolamine fatty acid titanate

Used in dispersion/anti-settling agents for inks, coatings and pigments/fillers of coatings. Applicable to both solvent-based and waterborne products, and effective for carbon black in dispersion.

JN-54

TILC-OMTET

Alkylolamine titanate

Chelate-type structure, non-hydrolysis and water solubility leading to clear and stable solution. Used in curing agents necessary to aqueous polyester paints; Used in driers for air drying water-based alkyd resin, in stead of metallic soap driers can help improve dramatically mechanical properties, weatherability, salt fog resistance, yellowing resistance. Improve quality control of Magnetic powder application; Reduce viscosity of composition in moulding gel system process, shorten cross-linking time and improve performance of moulding gel wares.

JN-AT

TILC-OMTET

Alkylolamine ethylene titanate

Used in thixotropic agents effective for latex containing cellulose additives; driers for water-based alkyd resin paints; dispersants and anti-settling agents for water-based coatings. Improve films in properties of water repellency, wearability and washing resistance.